FeaturedPremium 24V Strip Light — 21W
240 LEDs/m at 24V for long runs without visible voltage drop.
- Wattage
- 21 W/m
- Colour Temperature
- 3000K / 4000K / 6500K
- CRI
- 80
68 products across 10 ranges — strip, dot-less COB, waterproof, smart, profiles, drivers and sensors. Every specification below is as printed in the catalogue.
Download Complete Catalogue68 products
Featured240 LEDs/m at 24V for long runs without visible voltage drop.
Featured320 LEDs/m behind a continuous phosphor — a seamless line, no dots.
FeaturedIP67-sealed dotless COB for wet areas and covered exteriors.
FeaturedTunable 2200K–10000K on one run. CRI 90, double-sided PCB.
FeaturedMains-direct dotless rope, IP66. No separate driver needed.
Featured10A aluminium-cased 24V driver for larger installations.
Featured360° ceiling PIR, 800W load, 10s–7min adjustable delay.
Featured7mm to 25mm, surface or concealed. 2m lengths, diffuser included.
Featured240 LEDs/m on 3oz copper. Three whites plus Amber and Ice Blue.
FeaturedDotless COB that cuts anywhere — no fixed cut points.

120 LEDs/m on a 5mm board for tight cove and joinery details.

App-controlled 3-channel controller for RGB and tunable tape.

240 LEDs/m at 24V in warm or neutral white.

IP66 jacketed tape in three whites for sheltered exteriors.

65W and 85W ABS-housed supply for the Smart series.

Emits through 360° — a lit line from every angle.

10A aluminium-cased 12V driver.

Concealed above the ceiling — senses through plasterboard.

45° corner extrusions, 10×10mm to 90mm, that graze the surface.

Manual 30A rotary dimmer for single-colour tape.

Addressable 5050 RGB for chase effects and colour washes.

Sequenced warm-white tape for stairs and corridors.

480 LEDs/m addressable COB for gradients and colour chases.

IP68 addressable RGB for facades and water features.

Handset with display for the tunable-white Smart series.

Mains-direct dot-less COB at CRI 80. No driver needed.

Low-profile driver for shallow voids. 72W–400W.

Door-triggered cabinet sensor with a 3–4 inch range.

Brushed gold 17mm, surface or concealed, with matching fixings.

3840lm recessed panel, 120° beam, three colour temperatures.

240 LEDs/m across three whites plus Amber and Ice Blue.

Long 24V runs at entry cost. 240 LEDs/m, three whites.

288 LEDs/m on a slim 8mm board for narrow profiles.

IP66 sealed 12V tape for bathrooms and splashbacks.

Three whites on one mains-direct board.

5A aluminium-cased 12V driver for single short runs.

Lights a staircase tread by tread, up to 32 steps.
Bendable channel for curves. 120° beam, 50m and 100m rolls.

24V four-channel controller at 30A, with app control.

240 LEDs/m at CRI 80, still on a 5mm board.

Addressable warm white, seamless line, CRI 90.

16.5A aluminium-cased 12V driver.

Surface-mounted microwave sensor where there is no ceiling void.

35×12mm to 50×20mm — deep enough to be the main light source.

Touch-wheel control for 3-in-1 and RGB tape, no app needed.

Warm, neutral and cool white mixed on one 3oz board.

25A aluminium-cased 12V driver for large schemes.

Spring-clip recessed microwave sensor, 7–8m range.

Black body, white diffuser. A black line by day, light by night.

30A controller covering single colour, RGB and tunable white.

240 LEDs/m across three whites at the range's entry price.

33.3A aluminium-cased 12V driver — the largest in the range.

180° outdoor-rated PIR reaching 11–13 metres.

Black body and black diffuser — invisible until switched on.

Dimming and running effect for single-colour addressable tape.

5A aluminium-cased 24V driver for a single room.

Low-voltage cabinet sensor — no mains inside the carcass.

18mm Blendable for curves, and the heavier Shell section.

Solderless full-copper joints for 5mm, 8mm and 10mm tape.

16.5A aluminium-cased 24V driver for facade and floor runs.

Entry-level 12V/24V cabinet door sensor.

1m and 2m surface track in black or white, ABS or aluminium.

Downlight with the sensor built in. 15W or 22W, round or square.

IP66 dusk-to-dawn photocell switching up to 300W.

Rechargeable 10W motion bar — no wiring at all.

Remote or manual wall switch, 750–1500W, two-module box.

Running sequence only, for stairs switched elsewhere.

Stair sequencing and running effect on one board.
Every range, size and specification in one PDF — including the profile size matrix and accessory listings not shown above.
Discover premium lighting solutions for every project.